NAME¶

pnmtopalm - convert a PNM image to a Palm Bitmap

SYNOPSIS¶

pnmtopalm

[-verbose]

[-depth=N]

[-maxdepth=N]

[-colormap]

[-transparent=color]

[-density=N]

[-offset]

[-withdummy] [-scanline-compression | -rle-compression | -packbits-compression]

[pnmfile]

Minimum unique abbreviation of option is acceptable. You may use double hyphens instead of single hyphen to denote options. You may use white space in place of the equals sign to separate an option name from its value.

DESCRIPTION¶

This program is part of Netpbm(1).

pnmtopalm reads a PNM image as input, from Standard Input or pnmfile and produces a Palm Bitmap as output.

Palm Bitmap files are either grayscale files 1, 2, or 4 bits wide, or color files 8 bits wide, so pnmtopalm automatically scales colors to have an appropriate maxval, unless you specify a depth or max depth. Input files must have an appropriate number and set of colors for the selected output constraints.

This often means that you should run the PNM image through pnmquant or pnmremap before you pass it to pnmtopalm. Netpbm comes with several colormap files you can use with pnmremap for this purpose. They are palmgray2.map (4 shades of gray for a depth of 2), palmgray4.map (16 shades of gray for a depth of 4), and palmcolor8.map (232 colors in default Palm colormap). In a standard Netpbm installation, these are in the Netpbm data directory, and you can find the Netpbm data directory with a netpbm-config --datadir shell command.

Example:

  pnmremap myimage.ppm \


           -mapfile=$(netpbm-config --datadir)/palmgray2.map \


  | pnmtopalm -depth=2 >myimage.palm

OPTIONS¶

-verbose

Display the format of the output file.

-depth=N

Produce a file of depth N, where N must be either 1, 2, 4, 8, or 16. Because the default Palm 8-bit colormap is not grayscale, if the input is a grayscale or monochrome image, the output will never be more than 4 bits deep, regardless of the specified depth. Note that 8-bit color works only in PalmOS 3.5 (and higher), and 16-bit direct color works only in PalmOS 4.0 (and higher). However, the 16-bit direct color format is also compatible with the various PalmOS 3.x versions used in the Handspring Visor, so these images may also work in that device.

-maxdepth=N

Produce a file of minimal depth, but in any case less than N bits wide. If you specify 16-bit, the output will always be 16-bit direct color.

-offset

Set the nextDepthOffset field in the palm file header to indicate the end of the file (and pad the end of the file to 4 bytes, since nextDepthOffset can point only to 4 byte boundaries).

A palm image file can contain multiple renditions of the same image, with different color depths, so a viewer can choose one appropriate for the display. The nextDepthOffset field tells where in the stream the next rendition begins.

pnmtopalm creates a file that contains only one image, but you can separately concatenate multiple one-image files to create a multi-image file. If you do that, you'll need to use -offset so that the resulting concatenation is a correct stream.

By default (if you don't specify -offset), pnmtopalm generates a nextDepthOffset field that says there is no following image (and does not add any padding after the image).

Version 3 Palm Bitmaps actually have a nextBitmapOffset field instead of the nextDepthOffset. The foregoing applies to whichever is relevant.

The -offset option was new in Netpbm 10.26 (January 2005). Before that, pnmtopalm always set the nextDepthOffset field to 'none.'

Before Netpbm 10.27 (March 2005), you cannot use -offset if you create a compressed raster (because pnmtopalm isn't smart enough to be able to know the size of the image at the time it writes the header). You also cannot use it with 16 bit color depth or with the -colormap option, for much the same reason.

-withdummy

This option tells pnmtopalm to put in the stream, after after the image, a dummy image header to introduce subsequent high density images.

This dummy image header is a special sequence specified in Palm Bitmap specifications. It looks to an older Palm Bitmap interpreter like an invalid image header, so such an intepreter will stop reading the stream there. But a new Palm Bitmap interpreter recognizes it for what it is (just something to choke an old interpreter) and skips over it. Presumably, you will add to the stream after this high density images which would confuse an older interpreter.

If you specify -withdummy, you must also specify -offset, since it doesn't make any sense otherwise.

-withdummy was new in Netpbm 10.27 (March 2005).

-colormap

Build a custom colormap and include it in the output file. This is not recommended by Palm, for efficiency reasons. Otherwise, pnmtopalm uses the default Palm colormap for color output.

-transparent=color

Marks one particular color as fully transparent. The format to specify the color is either (when for example orange) '1.0,0.5,0.0', where the values are floats between zero and one, or with the syntax '#RGB', '#RRGGBB' or '#RRRRGGGGBBBB' where R, G and B are hexadecimal numbers. Transparency works only on Palm OS 3.5 and higher.

-scanline-compression

Specifies that the output Palm bitmap will use the Palm scanline compression scheme. Scanline compression works only in Palm OS 2.0 and higher.

-rle-compression

Specifies that the output Palm bitmap will use the Palm RLE compression scheme. RLE compression works only with Palm OS 3.5 and higher.

-packbits-compression

Specifies that the output Palm bitmap will use the Palm packbits compression scheme. Packbits compression works only with Palm OS 4.0 and higher.

This option was new in Netpbm 10.27 (March 2005).

-density=N

This specifies the Palm Bitmap density. The density is a number that is proportional to the resolution the image should have when displayed. The proportionality factor is up to whatever is doing the displaying, but it's helpful to think of these numbers as being pixels per inch. The allowable values are:

• 72
• 108
• 144
• 216
• 288

  This option was new in Netpbm 10.27 (March 2005). Earlier Netpbm could not generate Version 3 Palm Bitmaps, so there was no such thing as density.

SEE ALSO¶

palmtopnm(1), pnmquant(1), pnmremap(1), pnm(1)

NOTES¶

Palm Bitmaps may contains multiple renditions of the same bitmap, in different depths. To construct an N-multiple-rendition Palm Bitmap with pnmtopalm, first construct renditions 1 through N-1 using the -offset option, then construct the Nth image without the -offset option. Then concatenate the individual renditions together in a single file using cat.

If you will include both high density and low density renditions, put the high density images last and when you create the last of the low density images, use the -withdummy option.

AUTHORS¶

This program was originally written as ppmtoTbmp.c, by Ian Goldberg and George Caswell. It was completely re-written by Bill Janssen to add color, compression, and transparency function. Copyright 1995-2001 by Ian Goldberg, George Caswell, and Bill Janssen.